How to install overhead showerhead?

The rain showerhead is a welcomeshower fixture but some find installing it a bit challenging.

In this post, we’ll help you do this step by step. But before that, let’s talk a little about this overhead shower set.

The rain showerhead stands out for the way it disperses water. True to its name, its shower resembles a gentle rainfall, which offers a great way to refresh and relax after a long day.

It can be made from different materials, but to enjoy its utmost benefits, it pays to consider high-quality ones. Aside from being visually pleasing, these options can also last longer.

Shower fixture installation tips

Before we move to the step-by-step procedure, here are some reminders worth noting.

  • Always refer to your manufacturer manual for specific installation instructions.
  • Avoid turning on the shower accidentally while installing the showerhead. Be sure to turn off your water supply before starting.
  • If you’re mounting the showerhead on the ceiling, turn off the water, too, before replacing the pipe.
  • Decide where you want to install the rain shower. Generally, a rain shower is positioned above the head for the water to be able to cover the entire body and so you can bathe more comfortably.
  • Complete the task faster and stay safe by using the right tools.

Also Check: “

How to install a rain shower head

Now, let’s get back to the topic. Here are steps on how to install an overhead showerhead.

  1. Remove the existing showerhead. If you have an old showerhead, the first step is to remove it. Showerheads can be harder to remove depending on how long they’ve been installed. You might need more tools, such as a wrench, to unscrew older showerheads.
  1. Clean the shower arm. The shower arm and the showerhead are separate pieces. Once you have removed the head, it’s time to look into the shower arm. Check for any debris and be sure to clean it thoroughly. Use a gentle cloth, such as a microfiber cloth, to prevent scratching the surface and give it a better clean. After cleaning, inspect the shower arm as well for leaks or corrosions. Damaged shower arms are better replaced so you can enjoy your shower experiences better. Wouldn’t your shower look better with an updated overhead shower system?
  1. Replace the Teflon tape. Replace the old Teflon tape to prevent leaks once your new showerhead is installed. Apply up to 5 turns and smooth the tape out with your hands. Remember to put the tape clockwise so it stays intact once you attach the showerhead.
  1. Connect and tighten the showerhead. Next is to connect the showerhead using a washer. See to it that the showerhead is secure and tight. Use a wrench to tighten the head further but don’t overdo it to make future removals easy. Be careful, too, so as not to damage the finish.

Once you’re done, clean up and inspect your new shower fixture for any leaks. If you’re seeing issues, don’t hesitate to call on a professional for assistance. Take it as an opportunity to have your entire overhead shower system examined.

LEAVE A REPLY

Please enter your comment!
Please enter your name here